Hot-mix tonnage and paving cost for driveways, parking lots and roads.
Based on hot-mix density of 145 lb/ft³. Material only — labor is extra.
Tons = (cubic feet × 145) ÷ 2000, using the standard hot-mix asphalt (HMA) density of 145 lb/ft³. Multiply by your price per ton for a material estimate. Professional installation typically adds $3–7 per square foot.
Free quotes from top-rated, pre-screened asphalt pros in your area.
2–3″ over a 4–6″ gravel base for driveways, 3–4″ for commercial lots, 4–6″ for heavy roads.
$40–80 per ton for material; installed driveways run about $3–12 per square foot.
A standard dump truck holds 8–12 tons; larger trucks up to 20. Most driveways use 1–3 tons.
Yes — 4–6″ of compacted gravel for driveways, 6–8″ for lots. Base prep is critical.
Small repairs, yes. New paving needs pro equipment to heat, place and compact the mix fast.